Useful tips can prevent PVC conveyor belt slips

The PVC conveyor belt slipping is often a production failure, we should find the effective solution to ensure the normal operation of our production. And so how can we resolve conveyor belt slipping? To overcome the slippery phenomenon, we must firstly find the cause of the slippery, then take effective measures to solve, Beijing EXQUISITE International Development Co., Ltd here have a few tips for you.

Note the steps:

1.    PVC conveyor belt tension is too small to slip. The tension of conveyor belt leaving the drum is not slack. This situation generally occurs in the start, the solution is you adjust the tension device, increase the initial tension.

2.    The friction between the drive roller and conveyor belt is not enough to cause slipping. The reason is there is water on the PVC conveyor belt or the environment is wet. The solution is to add some Rosin powder at the end of the drum. But be careful never by your hand, you should use the blowing equipment to blow it, avoid personal injured.

3.    The bearing of tail drum damages or the bearing of up and down roller damage, PVC conveyor belt slips. The reason is floating too much in the end of conveyor tail, not timely repair or not replace the damaged and not flexible parts, so the resistance is increased to slip.

4.    Start is so fast that PVC conveyor belt slips. At this time you can start the conveyor slowly. Such as you use the squirrel-cage motor, it can be moved twice before starting, we can effectively overcome the slip phenomenon.

5.    PVC conveyor belt load is too large, more than the motor capacity, it slips. At this point the favorable side of slip is the motor protected. Otherwise the motor will be burned if a long time. But for the operation, it is the slipping accident.